|
Maps
were originally colored to enhance appearance and
readability. Generally three or four colors (green,
pink, orange and yellow) distinguished political subdivisions,
black was used for names, red colored cathedrals or
other buildings distinguish large cities and
blue stands for water.
Many
maps and prints were colored at the time of printing.
Some care must be taken when buying these, to ensure
that no oxidization has taken place - Greens and browns
in particular tend to 'burn' through the paper. Burning
may be an unavoidable blemish in some maps from the
1600’s You should always hold any item you are interested
in up to the light, to check not just for any such
'burning', but also to see whether there are any defects,
such as small worm holes, evidence of repairs, etc.
Modern
Color. Often older maps issued without color have
color added in whole or in part. Any color added long
after the map was issued is referred to as modern
color. Modern color can be skillfully applied. If
it is skillfully applied and historically correct
it is often difficult to distinguish from contemporary
color. If you are in doubt you can ask us, for we
can usually distinguish between the two.
Many
antique maps or prints that were originally published
uncolored, have had modern coloring applied, or can
be colored to order. Normally sizing" will be
applied to the surface of the print before coloring,
to prevent the paint from "burning" the
paper.
Whether
or not you decide to have a map colored is very much
a matter of personal taste. The purists will argue
that the map or engraving should be left in its original
state. Others may prefer the added enjoyment of seeing
their collection in attractive colors, particularly
when the intention is to mate and frame them for display
in the home or work place.

|